Parts & Accessories

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
- Width : 17mm

$4.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal wheel magnets work with any speed sensor
- Thread-on speed magnet is positioned closer to the sensor for improved signal
- Aero speed magnet provides a sleek, low-profile, aerodynamic solution

$8.99
When it's time to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
Product details
1 - Sold in packs of three for easy upgrades to 108 tooth engagement
2 - Use 3 pawls/springs for 54 tooth engagement
3 - Use 6 pawls/springs for 108 tooth engagement
4 - Pawls sold separately

$9.99 - $14.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40
- Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

$11.99 - $14.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips
The valves you need to upgrade to Tubeless
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Use only with Bontrager TLR rim strip with rectangular base
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Sold as singles

$14.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel

$14.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel

$17.99
When it's time to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
Product details
1 - Sold in packs of three for easy upgrades to 108 tooth engagement
2 - Use 3 pawls/springs for 54 tooth engagement
3 - Use 6 pawls/springs for 108 tooth engagement
4 - Springs sold separately

$19.99
To be used exclusively with Bontrager Tubeless Ready (TLR) rims.
The rim strips you need to upgrade to Tubeless
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Use only with appropriate Bontrager TLR rim valve
- Rim strip replacement is recommended if removed from the wheel
- Sold as singles
- White strip is recommended for carbon rims
- TLR rim valve sold separately

$19.99
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
- For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service

$7.99
On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them.
- Converts a 12mm rear axle to fit in a frame with 9.5mm dropouts
- Requires one pair per hub

$48.60 - $54.00
$54.00
Up to 10% Off
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

$14.99
- Replacement rear wheel skewer.
- Specifically designed for use with Saris trainers.
- Can be used for both indoor and outdoor rides.

$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.

$17.99 - $19.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$22.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Page 1 of 1